Application & Handling
Suspend® SC
- Specimen Label: SSC-SL-9/02B
- MSDS: 102000003167 Version 2.1 12/13/2005
Please note: All labels and MSDS files are in .pdf format. To download and view labels and MSDS information you must have Adobe Acrobat Reader. So, if you already have Acrobat Reader, you're set. If not, you need to click here to automatically download and install it. The Acrobat Reader installation is easy and takes only minutes to complete. Then, click on the desired PDF, and you can view it on your computer screen. With Acrobat Reader, you can read and print any .pdf file.
Application Tips
- Treatments may be applied at 21-day intervals, or as necessary, to maintain adequate control.
- Treat specific areas that insects inhabit or where they are frequently found.
- Use 0.25 to 1.5 fluid ounces of SUSPEND® SC in one gallon of water and apply to adequately cover 1,000 sq. ft. Under conditions of severe pest infestations, when quick knockdown and/or longer residual control is desired, use 1 gallon of 0.06% per 1,000 sq. ft.
- When diluting, it is recommended to add approximately half the water to the spray tank, then add the proper amount of Suspend SC in accordance with the rates in the appropriate proportion. Agitate, then add the remaining water slowly to avoid excess foam. Thoroughly agitate the sprayer before using to insure proper suspension.
- If spraying is interrupted when using a backpack or handheld spray equipment, reinvert sprayer before use.
- If spray screens are used, they should be 50 mesh or larger.
